Wednesday, February 24, 2016

To pierce or to drill? That is the question

Using a cutting torch to pierce a hole is something frequently done whether you are using Plasma or Oxy-Fuel. But sloppy piercing increases wear and costs and it is just not practical for smaller holes.

Drilling is the obvious alternative but physically mounting a drilling machine on to the cutting machine can be difficult but it is worth the effort.

After purchasing a machine with an excellent deep hole drilling machine, holes are now only drilled and not pierced at one Swiss cutting company. 
They say that they have found that that this solution his is more economical, the cutting process is quicker and costs due to wear have been reduced.

8 comments:

  1. Your blogs and accumulation attracts me to arrive rearward again n again.best framing nailers

    ReplyDelete
  2. Basically, the drills were all corded, all had keyed chucks, and rotated in only one direction and at one speed. So, the choice was not too difficult. Just pick a brand you like.work sharp 3000

    ReplyDelete
  3. The Table is generally moved by a pinion or a rack. It may be the counterbalance from the axis of the spindle and can be positively rotated to position perpendicular mainly to the column part of the drill. go here

    ReplyDelete
  4. There is also a switch, usually near the trigger which reverses the operation of the drill. As you can imagine, these have distinct advantages over the basic corded drill. In addition to being able to perform all the functions of the basic corded drill, they also have a better suited although still limited ability to drive screws, and small lag bolts. https://simplehandyman.co.uk/best-cordless-drill-under-100/

    ReplyDelete

  5. amazing !!! good work. keep it up.

    find click here from here.

    ReplyDelete
  6. When working with metal you will need to utilize bring down rates while wood ventures should be in the medium to high scope of velocities.this website

    ReplyDelete
  7. Thank you for helping people get the information they need. Great stuff as usual. Keep up the great work!!! dremel tool

    ReplyDelete
  8. The writers can post work here for the development of good skills and can post creative quality content as well for the public to read.
    pak pets

    ReplyDelete