Even in the cutting industry there are fashion trends. As a new cutting method becomes fashionable, methods that had until then been used widely, start to be neglected. At present laser cutting is the “In” technique, a few years back it was plasma cutting. As plasma became fashionable, the popularity of oxy-fuel declined.
Considering all the advantages of oxy-fuel, I don’t understand why it is not still more widely used. I see the benefits as being lower capital and operating costs, straighter and more accurate cuts and the possibility to cut thicker material. There are a few disadvantages of course, cutting stainless steel isn’t possible, more heat is transferred into the plate and the cutting process is slower. In emerging countries, oxy-fuel cutting is less widely used than in more developed parts of the world, indeed in some countries, the oxy-fuel process isn’t used at all. I think this is wrong and we should re-consider the use of oxy-fuel cutting.
Found your post interesting to read. I can't wait to see your post soon. Good Luck for the upcoming update.This article is really very interesting and effective. laser cutting services
ReplyDeleteInteresting to read your post. I can't wait to see your next post. Good luck for upcoming updates. This article is very interesting and effective. Thanks for sharing such a blog. laser cutting services
ReplyDelete