Like me,
your favourite bedside book is probably a copy of ISO EN DIN 9013, Thermal
cutting - Classification of thermal cuts.
If it isn't and you would like a précis, basically the Good Book says
that whether you are looking at the squareness of a cut, the tolerance of the
cutting angle or roughness of the finished cut, you will always find that Oxy-Fuel gets the
highest rating.
Of course you do have to be looking at parts cut in a production environment made from industrial quality steel and not those made on an exhibition stand to amuse the visitors clutching their giveaways!
It is
undisputed that the Oxy-Fuel cutting systems provide excellent quality.
So Fact N°3:
Oxy-Fuel produces high quality cuts. PROVEN!
Greetings! Very useful advice in this particular post! It’s the little changes that will make the largest changes. Many thanks for sharing!
ReplyDeleteExhibition Stand Builders
I truly appreciate this post. I’ve been looking everywhere for this! Thank goodness I found it on Bing. You’ve made my day! Thank you again
ReplyDeleteExhibition Stand Contractors
You have done a good job by publishing this article about fuel produces I appreciate your efforts which you have put into this article, It is a beneficial article for us. Thanks for sharing such informative thoughts.
ReplyDeletebunker fuel
You have done good work by publishing this article here. ISO certification in UAE I found this article too much informative, and also it is beneficial to enhance our knowledge. Grateful to you for sharing an article like this.
ReplyDelete